The 4" 10W Ultra-Thin Recessed Baffle Trim LED Downlight is designed to help reduce glare and eye strain. It features a durable die-cast housing and a frosted lens that diffuses light evenly. A switch on the side of the included junction box allows access to selectable CCT (2700K, 3000K, 3500K, 4000K, 5000K). The downlight delivers up to 700 lumens, efficiently replacing a 60W incandescent bulb. It features 0-10V dimming for precise, flicker-free light control and 90+ CRI for accurate color rendering. The downlight is easy to install using the included template and secures into a 4 21/64" (110 mm) hole with spring retention clips. It is suitable for both retrofit and new construction.
2*4FT LED Backlit Panel Light - 5 Selectable Wattages Up To 50W - 3 CCT Selectable - 6,250 Lumens Max - Pack Of 2
Maintenance-free replacement for 2-Lamp Fluorescent
125lm/W high efficacy output
Field selectable wattage: 25W /30W/ 35W/ 40W / 50W
Field selectable CCT: 3500K, 4000K, 5000K
DLC 5.1 Premium
TOP feature
•Deliver soft, dispersed illumination with an unprecedented level of uniformity
•Exhibit seamless and smooth finishes
•Field-adjustable Power and CCT available
•Sensor and EM solution available
•Flicker free(≤10%)
Features:
High efficiency, Deliver soft light, Exhibit seamless and smooth finishes
Lumens/LPW:
2,340L – 7,280L, 150LPW
Power selectable:
Yes
CCT selectable:
Yes
Ta Rating:
-20℃ - 50°C
Input voltage:
120-277V, 120-347V
DLC:
5.1S
Electrical scalability:
DC sensor, EM, Dim to Off
Size option:
2X4 2X2 1X4
TOP feature
•Low profile, more container load Qty.
•DLC listed, 125 lm/W.
•Field-adjustable Power and CCT(3500K, 4000K, 5000K) available.
•Sensor and EM solution available.
Features:
Low profile, cost-effective, 5.1 premium available
Lumens/LPW:
2,250L – 7,000L, 125LPW
Power selectable:
Yes
CCT selectable:
Yes
Ta Rating:
-20℃ - 50°C
Input voltage:
120-277V, 120-347V
DLC:
5.1P 5.1S
Electrical scalability:
DC sensor, EM, Dim to Off
Size option:
2X4 2X2 1X4
1*4FT LED Backlit Panel Light - 5 Selectable Wattages Up To 40W - 3 CCT Selectable - 5,000 Lumens Max - Pack Of 2
Maintenance-free replacement for 2-Lamp Fluorescent
125lm/W high efficacy output
Field selectable wattage: 20W /25W/ 30W/ 35W / 40W
Field selectable CCT: 3500K, 4000K, 5000K
DLC 5.1 Premium
4FT Wrap Round Light - 3 Selectable Wattages Up To 40W - 3 CCT Selectable - 5,200 Lumens Max - Pack Of 4
Maintenance-free replacement for 4-Lamp Fluorescent
130lm/W high efficacy output
Field selectable wattage: 30W / 35W / 40W
Field selectable CCT: 3500K, 4000K, 5000K
DLC 5.1 Premium
Emergency Battery, Motion Sensor optional
TOP feature
•IP66 rated and suitable for wet location application.
•Labor saving installation thanks to integrated luminous part.
•5VA housing, the highest classification in UL94.
•Field-adjustable power and CCT available.
•Plug and play Sensor available.
•EM solution ready.
•Lens customization available.
Features:
Vapor tight, Narrow housing, Light-part integrated
Lumens/LPW:
1,950L – 11,7100L 130LPW
Power selectable:
Yes
CCT selectable:
Yes
Ta Rating:
-40℃ - 45°C[1]
Input voltage:
120-277V, 120-347V
DLC:
5.1S
Ratings:
NSF, NEMA4X, IP66,IK10,Wet location, 5VA Flame Rating
Electrical scalability:
DC sensor, EM[2], Dim to off
Size(inch):
2ft: 23.6xx3.7x3.1 4ft: 47.2x3.7x3.1 8ft: 94.5x3.7x3.1
TOP feature
•115-120 lm/W, 1,700lm-10,800lm.•Fast and seamless connection thanks to patent tool-free press lock design.•Field-adjustable Power and CCT.•Direct-Indirect flux ratio adjustable.•Continuous run available.•Multiple connection methods.•Sensor and EM solution ready.
•Direct-Indirect flux ratio adjustable.
•Continuous run available.
•Multiple connection methods.
•Sensor and EM solution ready.
Features:
2.1” width fixture body, Direct or Direct-Indirect light
Lumens/LPW:
1,700L – 10,800L 115~120 LPW
Power selectable:
Yes
CCT selectable:
Yes
Ta Rating:
-20℃ - 50°C
Input voltage:
120-277V, 120-347V
DLC:
5.1S Linear ambient
Electrical scalability:
AC sensor, EM, Dim to Off
Size option:
2ft, 4ft, 8ft
TOP feature
•DLC 5.1 Premium
•150 LPW basic, higher efficacy available
•Field-adjustable Power and CCT available
•Sensor and EM* solution ready
•Ambient Operating Temp：-40℃, up to 55℃**
•6kV Surge Protection
•Over Temperature Protection
Features:
Non-Class 2 driver, Aluminum die-casting
Lumens/LPW:
11,700L – 60,000L 150LPW
Power selectable:
Yes
CCT selectable:
Yes
Ta Rating:
-40℃, up to 55°C**
Input voltage:
120-277V, 120-347V, 277-480V
DLC:
Premium
Ratings:
IP20,Damp location
Surge Protection:
6kV/6kV
Electrical scalability:
DC sensor, EM*, Cord and Plug, SPD, EMI filter, Dim to off
Size(inch):
1FT: 12.6x10.2x1.9, 1.2FT: 14.2x10.2x1.9, 1.6FT: 19.7x10.2x1.9, 2.4FT: 28.3x10.2x1.9, 3.3FT: 39.4x10.2x1.9
TOP feature
•Budget oriented
•150 LPW, 11,700 to 60,000 lumens.
•Field-adjustable Power and CCT available.
•Non-CLASS 2 driver with OTP function.
•6kV high level surge protection.
Features:
Non-Class 2 driver, Galvanized steel
Lumens/LPW:
11,700L – 60,000L 150LPW
Power selectable:
Yes
CCT selectable:
Yes
Ta Rating:
-20℃ - 50°C*
Input voltage:
120-277V, 120-347V, 277-480V
DLC:
Premium
Ratings:
IP20,Damp location
Surge Protection:
6kV/6kV
Electrical scalability:
DC sensor, EM**, Cord and Plug, SPD, EMI filter, Dim to off, 480-277 transformer**
Size(inch):
1.1FT: 13.0x10.2x1.8, 1.4FT: 16.5x10.2x1.8, 1.9FT: 22.8x10.2x1.8, 2.6FT: 31.1x10.2x1.8, 3.7FT: 44.1x10.2x1.8
TOP feature
•145LPW, DLC 5.1 premium.
•Field-adjustable Power and CCT available.
•3 CCT and 2CCT version optional.
•12V Aux and sensor receptacle optional.
•120-347, 277-480V optional.
•EM solution ready.
•IK09, IP65
•Customization.
The LED cylinder track light is a durable, adaptable solution for modern commercial interiors. Available in white or black with Halo and Juno adapter, it features a built-in color temperature and wattage switch, allowing effortless adjustments between 2700K, 3000K, 3500K, 4000K, 5000K and 900lm, 1350lm, 1800lm for customized ambiance. With universal connector compatibility and a high CRI of 90+ for vivid color rendering, this track light integrates seamlessly into commercial lighting systems. Its 350° rotation and 0°–180° gimbal adjustment as well as 20°-50° zoomable beam angle ensure precise light direction for any setting.
The LED cylinder track light is a durable, adaptable solution for modern commercial interiors. Available in white or black with Halo and Juno adapter, it features a built-in color temperature and wattage switch, allowing effortless adjustments between 2700K, 3000K, 3500K, 4000K, 5000K and 1800lm, 2250lm, 2700lm for customized ambiance. With universal connector compatibility and a high CRI of 90+ for vivid color rendering, this track light integrates seamlessly into commercial lighting systems. Its 350° rotation and 0°–180° gimbal adjustment as well as 20°-50° zoomable beam angle ensure precise light direction for any setting.
LED Parking Lot Light - Shoebox Area Light - 300W - 5000K - 45,000 Lumens - 1,000W MH Equal - 277-480V
Increase energy savings with optional photocell
IP65 waterproof rating
277-480VAC
5-year warranty
Type III-M Light distribution
Multiple mounts available
Equivalent to 1,000Wmetal halide
DLC 5.1 Premium
UL Listed for wet location
2-3/8” OD Horizontal Tenon Mid-Pole Bracket is designed to mount light fixture that is equipped with a adjustable slipfitter onto a 2-3/8” OD horizontal tenon.
The 2-3/8” OD Tenon Mount Adaptor for Yoke Fixtures is designed to mount light fixtures that are equipped with a yoke mount onto a 2-3/8” OD tenon
The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Four fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally
The Bracket is designed to mount over 2-3/8” (60mm) O.D.vertical tenon. Three fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
The Bracket is designed to mount over 2-3/8” (60mm) O.D.vertical tenon. Three fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally.
The Bracket is designed to mount over 2-3/8” (60mm)O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally
The Bracket is designed to mount over 2-3/8” (60mm) O.D. vertical tenon. Two fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally
Mount inside of 5” square pole. Furnished with four 5/16” hex head stainless-steel bolts.Vertical tenon measures 2-3/8” O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally
Used with round, non-tapered steel and aluminum poles.Furnished with three 3/8” hex head stainless-steel bolts.Vertical tenon measures 2-3/8” O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally
Mount inside of 4" square pole. Furnished with four 5/16'hex head stainless-steel bolts.Vertical tenon measures 2-3/8'O.D., and is made of steeltubing. Fixtures mounted to thisbracket can be adjusted bothvertically and horizontally
Used with round, non-tapered steel and aluminum poles.Furnished with three 3/8” hex head stainless-steel bolts.Vertical tenon measures 2-3/8” O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally.
CHASE NIPPLE XL 1IN 1IN PIPE
1 1/2" EMT 22 1/2 DEG ELB
RIGID THREAD COUPLING SS 1IN
1 1/2" FLEXIBLE STL COND 25 COIL
1 1/2" FLEXIBLE STL CONDUIT 100 REEL
4" OCT BOX MC CLAMP- ADJ BAR HGR 1-1/2" DP
4" OCT BOX 1-1/2" DP MC CLAMP W/ FL BRACKET
4" OCT BOX DRAWN 3-1/2" DEEP 1/2-3/4KO
Alflex™ Type RWA is manufactured with a lightweight, high strength aluminum alloy. Metal strip is helically formed into continuously interlocked flexible metal conduit that can withstand impact and crushing forces.Aluminum Flexible Metal Conduit. High Strength Aluminum Alloy Strip. 5/16" is UL Recognized Component. UL Listed in sizes 3/8" to 3".
HENYENTEK’s one circuit track system with miniature size and push in connector provides versatility for every lighting application. The system is designed and engineered for safety and easy installation.
HENYENTEK’s one circuit track system with miniature size and push in connector provides versatility for every lighting application. The system is designed and engineered for safety and easy installation.
HENYENTEK’s one circuit track system with miniature size and push in connector provides versatility for every lighting application. The system is designed and engineered for safety and easy installation.
One circuit track adapter compatible with most 3-wire track system
Replaces end cap included with each individual track.Each individual track includes (2) dead end caps.
Used to connect two pieces of track together and carry the electricity. Cannot be used as a power feed.
One-Circuit live end feed powers track system from the end of a run. Bottom knockout allows direct feed with electrical connector. Left polarity end feeds can be used at the end of powered run to continue “or jump” to another track run.
Our luminaire disconnect connector (item number 873-953) simplifies electrical installations. Conductors can only be connected to this luminaire disconnect connector if their strip length is between 11 mm and 13 mm. Featuring conductor terminals along with PUSH WIRE®, this product delivers reliable performance. Our tried-and-tested PUSH WIRE® connection offers the fastest method for clamping conductors. It utilizes the conductor's stiffness to overcome the clamping spring's contact force. Dimensions: 19 x 13.2 x 42 mm (width x height x depth).
Error-free electrical installations are guaranteed with this luminaire disconnect connector (item number 873-902). Ensure that the strip lengths are between 11 mm and 13 mm when connecting conductors to this luminaire disconnect connector. This product features conductor terminals and utilizes PUSH WIRE® as well as PUSH WIRE®. Our trusted PUSH WIRE® connection offers the fastest method for clamping conductors. It utilizes the conductor's stiffness to overcome the clamping spring's contact force. Dimensions: 13 x 13.2 x 42 mm (width x height x depth). Depending on the type of conductor, this luminaire disconnect connector is designed for conductor cross sections ranging from 0.75 mm² to 4 mm².
This luminaire disconnect connector (item number 873-903) is designed for seamless electrical installations. Ensure that the strip lengths are between 11 mm and 13 mm when connecting conductors to this luminaire disconnect connector. This product features conductor terminals and utilizes PUSH WIRE® as well as PUSH WIRE®. Our PUSH WIRE® connection uses the stiffness of the conductor to overcome the clamping spring's contact force, allowing you to clamp the conductor in place more quickly and easily. The dimensions are 19 x 13.2 x 42 mm (width x height x depth). This luminaire disconnect connector is suitable for conductor cross sections ranging from 0.75 mm² to 4 mm².
